Saniforce 2.0 Piston Pumps
Manufacturer | Graco |
---|---|
Product Line | SaniForce |
Graco’s powerful line of sanitary piston pumps move extremely difficult materials when others cannot. They have pressure ratios up to 12:1 and are ideal for low to high viscosity products up to 100,000 cps. The Graco Merkur® air motors improve serviceability, increase efficiency and offer a lower cost of ownership. The quick knockdown lowers are made with 300 series stainless steel for long-lasting durability and portability.
ADDITIONAL INFORMATION
Graco SaniForce Piston Pump Line Specifications
Fluid to air pressure ratio | 2:1 | 6:1 | 5:1 | 12:1 |
---|---|---|---|---|
Max. fluid pressure | 250 psi (17 bar, 1.7 MPa) | 600 psi (41 bar, 4.1 MPa) | 400 psi (28 bar, 2.8 MPa) | 1200 psi (83 bar, 8.3 MPa) |
Max. fluid flow at 60 cpm | 2.5 gpm (9.5 lpm) | 4.0 gpm (15.1 lpm) | 14.0 gpm (53 lpm) | 8.5 gpm (32 lpm) |
Air consumption at 60 cpm | 6 cfm at 100 psi (7 bar, 0.7 MPa) | 31 cfm at 100 psi (7 bar, 0.7 MPa) | 69 cfm at 80 psi (5.5 bar, 0.5 MPa) | 116 cfm at 100 psi (7 bar, 0.7 MPa) |
Volume per cycle | 0.025 gal (0.095 l) | 0.067 gal (0.25 l) | 0.23 gal (0.87 l) | 0.14 gal (0.54 l) |
Max. operating temperature (fluid) | 180ºF (82ºC) | 250ºF (121ºC) | 140ºF (60ºC) | 160ºF (71ºC) |
Max. operating temperature (air motor) | 120ºF (48.8ºC) | 120ºF (48.8ºC) | 120ºF (48.8ºC) | 120ºF (48.8ºC) |
Max. size pumpable solids | 0.13 in (0.32 cm) | 0.13 in (0.32 cm) | 0.25 in (0.64 cm) | 0.25 in (0.64 cm) |
Max. air input pressure | 100 psi (7.0 bar, 0.7 MPa) | 100 psi (7.0 bar, 0.7 MPa) | 80 psi (5.5 bar, 0.55 MPa) | 100 psi (7 bar. 0.7 MPa) |
Air inlet size | 3/8 npt(f) | 1/2 npt(f) | 1/2 npt(f) | 1/2 npt(f) |
Fluid outlet size | 1 in (2.5 cm) Tri-Clamp | 1.5 in (3.8 cm) Tri-Clamp | 2 in (5.1 cm) Tri-Clamp | 2 in (5.1 cm) Tri-Clamp |
Fluid inlet | 2.0 in (5 cm) Cylinder OD | 2.5 in (6.3 cm) Tri-Clamp (select sizes) | 2.5 in (6.3 cm) Tri-Clamp (24F196 only) (select sizes) | 6 in (15.2 cm) Tri-Clamp |